PRODUCTS


length:8 m
Power:4KW
Principle:It is the equipment required for the production process of continuously casting high-temperature solution into billets with certain shapes and sizes.
Application:For casting copper ingots and aluminum ingots

Power supply voltage: 3phase 4wire
hydraulic pressure: 3.0-3.5mpa

Processing range:S10-40mm
Speed:35 m/min
Power:5.5KW*2,400W*13
Principle:The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application:This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.

Main motor power:50(KW)
Genset Brand:futuer
Speed:1500 (RPM)
Principle:
Application:

Power supply voltage: 3phase 4wire
hydraulic pressure: 3.0-3.5mpa
DLG-5T Single Bar Peeling Machine
Processing Range:Φ85
Speed:25m/min
Power:22kw
Principle:
Application:This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
—— PEELING MACHINE ——
Suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods
—— STANDARD SIZES ——
Detailed parameters of the equipment
Model(T) | DLG-3T | DLG-5T | DLG-8T | DLG-10T | DLG-15T | |||
Pull(kn) | 30 | 50 | 80 | 100 | 150 | |||
Maximum Clamping Size(mm) | Φ70 | Φ85 | Φ130 | Φ160 | Φ230 | |||
Pulling Speed(m/min) | 25 | 25 | 20 | 20 | 15 | |||
Power(kw) | 18.5 | 22 | 30 | 37 | 45 |
—— EFFECT COMPARISON ——
Product Comparison Before And After Peeling
—— OPERATING PROCEDURES ——
Press The Switch,Send Copper Rod,Step On Pedal,Pull Copper Rod
Turn the knob to [Automatic], move the trolley to the end, put in the pull rod, step on the foot switch, the trolley automatically enters and raises its head, push the pull rod to the die opening, when the trolley is in place, clamp the clamp strip, and the stripping starts; Release the foot switch, the material rack will automatically reset and complete the automatic operation.
—— EQUIPMENT DETAILS ——
Detailed Display Of The Product
—— FREE ACCESSORIES ——
Free Accessories For Double Rod Lasher
—— EQUIPMENT SHIPMENT ——
Ships three or four times a week on average
—— INSTALLATION & COMMISSIONING ——
Provide professional technicians for overseas debugging
—— SUCCESS CASE ——
Complete production line
—— FUTUER TEAM ——
About Guangdong Futuer Machinery Co., Ltd.


length:8 m
Power:4KW
Principle:It is the equipment required for the production process of continuously casting high-temperature solution into billets with certain shapes and sizes.
Application:For casting copper ingots and aluminum ingots

Power supply voltage: 3phase 4wire
hydraulic pressure: 3.0-3.5mpa

Processing range:S10-40mm
Speed:35 m/min
Power:5.5KW*2,400W*13
Principle:The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application:This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.

Main motor power:50(KW)
Genset Brand:futuer
Speed:1500 (RPM)
Principle:
Application:

Power supply voltage: 3phase 4wire
hydraulic pressure: 3.0-3.5mpa
Get In Touch From Message
In order to know more about our products, we recommend new products. If you need to leave your contact information, we will send you an electronic atlas.

