PRODUCTS
Product categories
Recommended Products
Model：PLC-5T
Processing Range：Φ85
Speed：25m/min
Power：22kw
Principle：
Application：This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
Processing Range：Φ85
Speed：25m/min
Power：22kw
Principle：
Application：This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
Number of views:
1000
Keywords:
drawing machine
drawing machine
rod peeling machine
bar peeling machine
brass rod peeling machine
Spindle speed：60-5000rpm
Spindle motor power：2.2kw
Spindle clamping method：Spring collet
Tool specifications：12*12/Φ25
Principle：The accuracy of tool path can be analyzed using the idle running energy of CNC machine tools. After inputting the digital program into the machine tool, install the fixture tool and workpiece
Application：Suitable for grinding and polishing flat surfaces, grooves, toothed parts, and various curved surfaces on lathes
Spindle motor power：2.2kw
Spindle clamping method：Spring collet
Tool specifications：12*12/Φ25
Principle：The accuracy of tool path can be analyzed using the idle running energy of CNC machine tools. After inputting the digital program into the machine tool, install the fixture tool and workpiece
Application：Suitable for grinding and polishing flat surfaces, grooves, toothed parts, and various curved surfaces on lathes
Number of views:
1000
Keywords:
Model：TQ-8
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Number of views:
1000
Keywords:
wheel straightening
wire straightening
wire straightening machine
bar straightening machine
浏览量:
1000
LW-30 Heavy-duty vertical and horizontal straightening machine
Classification
Vertical & Horizontal Type Straightener
Processing range：S6-30mm
Speed：40m/min
Power：3KW*2
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.
零售价
0.0
Yuan
市场价
0.0
Yuan
浏览量:
1000
产品编号
数量
-
+
库存:
0
1
Product Details
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
—— STRAIGHTENING MACHINE ——
Used for straightening special-shaped bars such as iron, copper, aluminum and other metals such as hexagonal and square shapes
—— STANDARD SIZES ——
Detailed parameters of the equipment
| Model | Non-ferrous metal straightening range (mm) | ferrous metal straightening range (mm) | Power(kw) | Speed(m/min) | Straightness(mm/m) |
| LW-30 |
S6-30 |
S6-20 | 3*2 | 40/30 | ≤0.30 |
| LW-40 |
S10-40 |
S10-30 | 4*2 | 35/30 | ≤0.30 |
| LW-50 |
S15-50 |
S15-40 | 5.5*2 | 30/25 | ≤0.50 |
—— EFFECT COMPARISON ——
Product comparison before and after straightening
—— OPERATING PROCEDURES ——
Slow gear test machine, Fast gear production
Press the switch, put the bar, adjust the pressure roller, adjust the unloading rack
—— EQUIPMENT DETAILS ——
Detailed display of the product
—— EQUIPMENT SHIPMENT ——
Ships three or four times a week on average
—— INSTALLATION & COMMISSIONING ——
Provide professional technicians for overseas debugging
—— SUCCESS CASE ——
Complete production line
—— FANSHUN TEAM ——
About Foshan Fanshun Machinery Co., Ltd.
Recommended Products
Model：PLC-5T
Processing Range：Φ85
Speed：25m/min
Power：22kw
Principle：
Application：This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
Processing Range：Φ85
Speed：25m/min
Power：22kw
Principle：
Application：This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
Number of views:
1000
Keywords:
drawing machine
drawing machine
rod peeling machine
bar peeling machine
brass rod peeling machine
Spindle speed：60-5000rpm
Spindle motor power：2.2kw
Spindle clamping method：Spring collet
Tool specifications：12*12/Φ25
Principle：The accuracy of tool path can be analyzed using the idle running energy of CNC machine tools. After inputting the digital program into the machine tool, install the fixture tool and workpiece
Application：Suitable for grinding and polishing flat surfaces, grooves, toothed parts, and various curved surfaces on lathes
Spindle motor power：2.2kw
Spindle clamping method：Spring collet
Tool specifications：12*12/Φ25
Principle：The accuracy of tool path can be analyzed using the idle running energy of CNC machine tools. After inputting the digital program into the machine tool, install the fixture tool and workpiece
Application：Suitable for grinding and polishing flat surfaces, grooves, toothed parts, and various curved surfaces on lathes
Number of views:
1000
Keywords:
Model：TQ-8
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Number of views:
1000
Keywords:
wheel straightening
wire straightening
wire straightening machine
bar straightening machine
Get In Touch From Message
In order to know more about our products, we recommend new products. If you need to leave your contact information, we will send you an electronic atlas.
客户留言
Description:
