PRODUCTS
Product categories
Recommended Products
Model：GYT-120 melting furnace
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Number of views:
1000
Keywords:
Model：
Cutting diameter：Φ8-45mm
Maximum cutting length：120mm
Working frequency：10-100pice/min
Principle：
Application：Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Cutting diameter：Φ8-45mm
Maximum cutting length：120mm
Working frequency：10-100pice/min
Principle：
Application：Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Number of views:
1000
Keywords:
Model：
Cutting diameter：Φ8-45mm
Maximum cutting length：120mm
Working frequency：10-100pice/min
Principle：
Application：Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Cutting diameter：Φ8-45mm
Maximum cutting length：120mm
Working frequency：10-100pice/min
Principle：
Application：Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Number of views:
1000
Keywords:
model：CM0516
Applicable rod diameter (mm)：2000-4000
power：14kw
weight：1150kg
Principle：The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application：
Applicable rod diameter (mm)：2000-4000
power：14kw
weight：1150kg
Principle：The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application：
Number of views:
1000
Keywords:
Model：
Processing range：S160mm-425mm
Speed：40 m/min
Power：75*2kw
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.
Processing range：S160mm-425mm
Speed：40 m/min
Power：75*2kw
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.
Number of views:
1000
Keywords:
浏览量:
1000
SVO-70 Servo casting machine
Classification
Casting Equipment
Power：2.2kw
Maximum casting speed：60m/min
Principle：
Application：Lead casting of various round (square) bars, hexagonal and profiled copper materials, suitable for thermal insulation of coal furnace and electric furnace
零售价
0.0
Yuan
市场价
0.0
Yuan
浏览量:
1000
产品编号
数量
-
+
库存:
0
1
Product Details
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
—— CASTING MACHINE ——
Cast metal pipe/rod
—— CASTING SIZES ——
Detailed parameters of the equipment
—— EQUIPMENT DETAILS ——
Detailed display of the product
—— EQUIPMENT SHIPMENT ——
Ships three or four times a week on average
—— INSTALLATION & COMMISSIONING ——
Provide professional technicians for overseas debugging
—— SUCCESS CASE ——
Complete production line
—— FANSHUN TEAM ——
About Foshan Fanshun Machinery Co., Ltd.
下一个
无
Recommended Products
Model：GYT-120 melting furnace
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Number of views:
1000
Keywords:
Model：
Cutting diameter：Φ8-45mm
Maximum cutting length：120mm
Working frequency：10-100pice/min
Principle：
Application：Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Cutting diameter：Φ8-45mm
Maximum cutting length：120mm
Working frequency：10-100pice/min
Principle：
Application：Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Number of views:
1000
Keywords:
Model：
Cutting diameter：Φ8-45mm
Maximum cutting length：120mm
Working frequency：10-100pice/min
Principle：
Application：Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Cutting diameter：Φ8-45mm
Maximum cutting length：120mm
Working frequency：10-100pice/min
Principle：
Application：Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Number of views:
1000
Keywords:
model：CM0516
Applicable rod diameter (mm)：2000-4000
power：14kw
weight：1150kg
Principle：The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application：
Applicable rod diameter (mm)：2000-4000
power：14kw
weight：1150kg
Principle：The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application：
Number of views:
1000
Keywords:
Model：
Processing range：S160mm-425mm
Speed：40 m/min
Power：75*2kw
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.
Processing range：S160mm-425mm
Speed：40 m/min
Power：75*2kw
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.
Number of views:
1000
Keywords:
Get In Touch From Message
In order to know more about our products, we recommend new products. If you need to leave your contact information, we will send you an electronic atlas.
Online message
Description:
