PRODUCTS


Melting Rate: copper:500kg/h brass:600kg/h
Power: 120kw
Principle:The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application:Store brass solution, cast brass rod/tube

Cutting diameter:Φ8-45mm
Maximum cutting length:120mm
Working frequency:10-100pice/min
Principle:
Application:Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials

Cutting diameter:Φ8-45mm
Maximum cutting length:120mm
Working frequency:10-100pice/min
Principle:
Application:Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials

Applicable rod diameter (mm):2000-4000
power:14kw
weight:1150kg
Principle:The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application:

Processing range:S160mm-425mm
Speed:40 m/min
Power:75*2kw
Principle:The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application:This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.
Updraft Machine
Tensile strength:>170N/mm2
Elongation:>35%
Electrical conductivity:no less than 100%IACS (2mm dia soft wire)
Principle:The up drawing oxygen free copper rod continuous casting unit is a new technology to produce large length bright oxygen free rods, pipes, flat billets and other profiles
Application:Application:1. Copper pole: used for cable, electric wire, electromagnetic wire, enamelled wire, telephone wire, computer wire, etc.2. Copper pipe: copper material used for air conditioner, household industry copper pipe, joint, etc.3. Flat billet: used as the billet of copper busbar, electrical components, rolled copper strip, etc.4. Copper alloy wire: It is used as the blank of bearings, copper shafts, copper sleeves, welding wires, electronic decoration and other products for automobiles, high-speed trams, and mechanical products.
—— UPDRAFT MACHINE ——
The up drawing oxygen free copper rod continuous casting unit is a new technology to produce large length bright oxygen free rods, pipes, flat billets and other profiles
—— STANDARD SIZES ——
Detailed parameters of the equipment
Density | 8.9kg/dm3 |
Tensile strength | >170N/mm2 |
Elongation | >35% |
Electrical conductivity | no less than 100%IACS (2mm dia soft wire) |
—— EQUIPMENT DETAILS ——
Detailed display of the product
—— EQUIPMENT SHIPMENT ——
Ships three or four times a week on average
—— INSTALLATION & COMMISSIONING ——
Provide professional technicians for overseas debugging
—— SUCCESS CASE ——
Complete production line
—— FUTUER TEAM ——
About GuangDong Futuer Machinery Co., Ltd.


Melting Rate: copper:500kg/h brass:600kg/h
Power: 120kw
Principle:The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application:Store brass solution, cast brass rod/tube

Cutting diameter:Φ8-45mm
Maximum cutting length:120mm
Working frequency:10-100pice/min
Principle:
Application:Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials

Cutting diameter:Φ8-45mm
Maximum cutting length:120mm
Working frequency:10-100pice/min
Principle:
Application:Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials

Applicable rod diameter (mm):2000-4000
power:14kw
weight:1150kg
Principle:The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application:

Processing range:S160mm-425mm
Speed:40 m/min
Power:75*2kw
Principle:The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application:This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.
Get In Touch From Message
In order to know more about our products, we recommend new products. If you need to leave your contact information, we will send you an electronic atlas.

