sous

Products
/
/
Auxiliary Equipment

PRODUCTS

Material opening elevator
Model:
Cutting diameter:Φ8-45mm
Maximum cutting length:120mm
Working frequency:10-100pice/min
Principle:
Application:Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Fully automatic bar cutting machine
Model:
Cutting diameter:Φ8-45mm
Maximum cutting length:120mm
Working frequency:10-100pice/min
Principle:
Application:Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
CM0516-PLC Double head chamfering machine
model:CM0516
Applicable rod diameter (mm):2000-4000
power:14kw
weight:1150kg
Principle:The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application:
Saw blade gear grinding machine
Model:
Saw blade outer diameter:Φ70-270mm
Saw blade outer diameter:Φ16.22.27.32
main motor power:750w
Principle:
Application:Used for gear grinding of high speed steel and tungsten steel
Fully automatic bar cutting machine
Model:
Cutting diameter:Φ8-45mm
Maximum cutting length:120mm
Working frequency:10-100pice/min
Principle:
Application:Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Hydraulic alligator shear scrap metal shearing machine
Model:
Processing range:S10-40mm
Speed:35 m/min
Power:5.5KW*2,400W*13
Principle:The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application:This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.
Long range warm forging press
Total power:3.2Kw
Power supply voltage: 3phase 4wire
hydraulic pressure: 3.0-3.5mpa
Transfer Machine
Total power:3.2Kw
Power supply voltage: 3phase 4wire
hydraulic pressure: 3.0-3.5mpa
Double station edge trimming machine
Mpa:12
Max.Opening Height: 380mm
Rated Pressure: 50(5t)
Principle:continue high speed work,high efficiency.
Multi-station hydraulic press
Mpa:12
Max.Opening Height: 380mm
Rated Pressure: 50(5t)
Principle:continue high speed work,high efficiency.
Previous page
1
2
6
fanshun
Online message

Copyright © 2022 - Fanshun Machinery  粤ICP备2023001943号  www.300.cn SEO