PRODUCTS


length:8 m
Power:4KW
Principle:It is the equipment required for the production process of continuously casting high-temperature solution into billets with certain shapes and sizes.
Application:For casting copper ingots and aluminum ingots

Power supply voltage: 3phase 4wire
hydraulic pressure: 3.0-3.5mpa

Processing range:S10-40mm
Speed:35 m/min
Power:5.5KW*2,400W*13
Principle:The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application:This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.

Main motor power:50(KW)
Genset Brand:futuer
Speed:1500 (RPM)
Principle:
Application:

Power supply voltage: 3phase 4wire
hydraulic pressure: 3.0-3.5mpa
YYL-2T Hydraulic peeling machine
Processing Range:Φ22mm*2
Speed:20m/min
Power:11KW
Principle:
Application:This machine is suitable for metal rods such as: steel rods, copper rods, aluminum rods peeling and polishing, peeling process
—— PEELING MACHINE ——
Suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods
—— STANDARD SIZES ——
Detailed parameters of the equipment
Model(T) | YYL-2T | YYL-3T | YYL-5T |
Pull(kn) | 20 | 30 | 50 |
Maximum Clamping Size(mm) | Φ40 | Φ60 | Φ100 |
Pulling Speed(m/min) | 20 | 15 | 15 |
Power(kw) | 11 | 22 | 30 |
Double pull diameter(mm) | Φ22*2 | Φ35*2 |
—— EFFECT COMPARISON ——
Product Comparison Before And After Peeling
—— OPERATING PROCEDURES ——
Press The Switch,Send Copper Rod,Step On Pedal,Pull Copper Rod
Turn the knob to [Automatic], move the trolley to the end, put in the pull rod, step on the foot switch, the trolley automatically enters and raises its head, push the pull rod to the die opening, when the trolley is in place, clamp the clamp strip, and the stripping starts; Release the foot switch, the material rack will automatically reset and complete the automatic operation.
—— EQUIPMENT DETAILS ——
Detailed Display Of The Product
—— EQUIPMENT SHIPMENT ——
Ships three or four times a week on average
—— INSTALLATION & COMMISSIONING ——
Provide professional technicians for overseas debugging
—— SUCCESS CASE ——
Complete production line
—— FUTUER TEAM ——
About Guangdong Futuer Machinery Co., Ltd.


length:8 m
Power:4KW
Principle:It is the equipment required for the production process of continuously casting high-temperature solution into billets with certain shapes and sizes.
Application:For casting copper ingots and aluminum ingots

Power supply voltage: 3phase 4wire
hydraulic pressure: 3.0-3.5mpa

Processing range:S10-40mm
Speed:35 m/min
Power:5.5KW*2,400W*13
Principle:The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application:This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.

Main motor power:50(KW)
Genset Brand:futuer
Speed:1500 (RPM)
Principle:
Application:

Power supply voltage: 3phase 4wire
hydraulic pressure: 3.0-3.5mpa
Get In Touch From Message
In order to know more about our products, we recommend new products. If you need to leave your contact information, we will send you an electronic atlas.

