sous

Products
/
/
Casting Equipment

PRODUCTS

Copper anode casting wheel
wheel diameter: About 9700mm
driving type: Center supported cantilever, circular drive
Machine power:About 60KW
Single anode plane weight: About 200_400kg/piece
Application:The 20-mold fully automatic quantitative wheel casting machine for copper anodes is a large-scale smelting production equipment that casts molten copper (also used for lead, tin and other non-ferrous metals) to make anode plates with specific shape specifications and weight through an automated process.
ZD-10 Ingot casting machine
Model:ZD-10
length:8 m
Power:4KW
Principle:It is the equipment required for the production process of continuously casting high-temperature solution into billets with certain shapes and sizes.
Application:For casting copper ingots and aluminum ingots
Core shooting machine
Frequency:40 (kva)
Main motor power:50(KW)
Genset Brand:futuer
Speed:1500 (RPM)
Principle:
Application:
SVO-70 Servo casting machine
Model:SVO-70
Power:2.2kw
Maximum casting speed:60m/min
Principle:
Application:Lead casting of various round (square) bars, hexagonal and profiled copper materials, suitable for thermal insulation of coal furnace and electric furnace
ZD-15 Ingot casting machine
Model:ZD-15
length:15 m
Power:5.5KW
Principle:It is the equipment required for the production process of continuously casting high-temperature solution into billets with certain shapes and sizes.
Application:For casting copper ingots and aluminum ingots
SYO-70 Die Casting Machine
Model:SYO-70
Casting size:Φ6-70
Speed:45m/min
Power:2.2kw
Principle:The shaped casting is led out with a lead rod and continuously pulled out from the other end of the casting chamber to obtain a casting of any length or shape and a specific length
Application:All kinds of round (square) rods, hexagonal and special-shaped copper materials are used for thermal insulation casting of coal furnace and electric furnace.
YQ-65 Ordinary hydraulic cutting machine
Model:YQ-65
Cutting Maximum Size:Φ65mm
Power:3kw
Principle:Mainly used for cutting and sawing of metal materials and various alloy materials
Application:Cutting brass rods/tubes
Updraft Machine
Density:8.9kg/dm3
Tensile strength:>170N/mm2
Elongation:>35%
Electrical conductivity:no less than 100%IACS (2mm dia soft wire)
Principle:The up drawing oxygen free copper rod continuous casting unit is a new technology to produce large length bright oxygen free rods, pipes, flat billets and other profiles
Application:Application:1. Copper pole: used for cable, electric wire, electromagnetic wire, enamelled wire, telephone wire, computer wire, etc.2. Copper pipe: copper material used for air conditioner, household industry copper pipe, joint, etc.3. Flat billet: used as the billet of copper busbar, electrical components, rolled copper strip, etc.4. Copper alloy wire: It is used as the blank of bearings, copper shafts, copper sleeves, welding wires, electronic decoration and other products for automobiles, high-speed trams, and mechanical products.
ZD-5 Casting machine
Model:ZD-5
length:5 m
Power:3KW
Principle:It is the equipment required for the production process of continuously casting high-temperature solution into billets with certain shapes and sizes.
Application:For casting copper ingots and aluminum ingots
ZD-3 Ingot casting machine
Model:ZD-3
length:3 m
Power:3KW
Principle:It is the equipment required for the production process of continuously casting high-temperature solution into billets with certain shapes and sizes.
Application:For casting copper ingots and aluminum ingots
Previous page
1
2
3
fanshun
Online message

Copyright © 2022 - Fanshun Machinery  粤ICP备2023001943号  www.300.cn SEO