PRODUCTS


Cooling capacity kcal/h:903000(kcal/h)
Fan power: 4.4KW
Equipment weight:2620
Principle:The cold water stored in the water tank is sucked into the circulating system by the circulating water pump. After it passes through the equipment to be cooled, it will flow out the water with higher temperature after playing the cooling role, and then it will be cooled by the water circulating radiator and cooling fan, and then add a new circulation
Application:The design of the system is simple, economical and practical, which not only greatly improves the work efficiency, but also greatly helps the pollution of clean environment

Melting Rate: copper:300kg/h brass:400kg/h
Power: 75kw
Principle:The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application:Power frequency cored induction copper melting furnace is specially used for smelting bronze, brass, red copper, etc.

Processing Range:9-12mm
Gearbox:500
Power:15kw
Principle:The pay-off is achieved by driving the pay-off frame with a frequency converter. Different metal materials, different silk varieties and requirements, the drawing process is very different, and the commonly used control technologies for winding are synchronous control and tension control.
Application:Reduces tension and peeling on coiled wire

Processing Range:Φ70
Speed:25m/min
Power:18.5kw
Principle:
Application:This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.

Rated load (kg):1000
Electric power (kw):11kw
Principle:With solid structure, large bearing capacity, stable lifting, simple installation and maintenance, it is an economic and practical ideal cargo conveying equipment for replacing elevators between low floors
Application:It is mainly applicable to the overhaul, maintenance, replacement of objects, maintenance, cleaning, scenery, etc. of cargo and manned aerial operations
WSL-40 Horizontal 2-Roll straightening machine
Processing range:Φ10-40mm
Speed:30 m/min
Power:6.5 KW/8 KW
Principle:The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application:This machine is used for fine straightening of metal pipe rods such as brass pipe rods, bronze pipe rods, aluminum pipe rods, copper pipe rods, etc., and has a certain polishing effect.
—— STRAIGHTENING MACHINE ——
Used to straighten brass round bars, red copper round bars, bronze round bars, and iron round bars
—— STANDARD SIZES ——
Detailed parameters of the equipment
Model | unit | WSL-20 | WSL-40 | WSL-60 | WSL-100 |
Diameter | mm | Φ5-20 | Φ10-40 | Φ15-60 | Φ30-100 |
Straighten length | m | 1.5-5 | |||
Ruducer | / | JZQ200 | JZQ250 | JZQ350 | JZQ400 |
Motor power | kw | 4.5/5.5 | 6.5/8 | 9/11 |
18.5/22 |
Straighten speed | m/min | 20-25 | 15-23 | 10-18 | 6-10 |
Host size(L*W*H) | mm |
2150*1100*1000 |
2450*1400*1150 | 2175*1500*1200 | 2900*2340*1500 |
Host weight | kg | 1000 | 1300 | 2100 | 3500 |
Unloading rack size(L*W*H) | mm | 2000*1100*840 | 2000*1100*840 | 2000*1100*890 | 2800*1600*1600 |
—— EFFECT COMPARISON ——
Product comparison before and after straightening
—— OPERATING PROCEDURES ——
Slow gear test machine, Fast gear production
Install the knife,Put in the bar,Adjust the pressure roller,Adjust the unloading rack
—— EQUIPMENT DETAILS ——
Detailed display of the product
—— FREE ACCESSORIES ——
Free accessories for two-wheel straightening machine
① Alloy knife *3 ② Feeding tube *3 ③ Unloading rack *1 ④ Tank *1
—— EQUIPMENT SHIPMENT ——
Ships three or four times a week on average
—— INSTALLATION & COMMISSIONING ——
Provide professional technicians for overseas debugging
—— SUCCESS CASE ——
Complete production line
—— FANSHUN TEAM ——
About Foshan Fanshun Machinery Co., Ltd.


Cooling capacity kcal/h:903000(kcal/h)
Fan power: 4.4KW
Equipment weight:2620
Principle:The cold water stored in the water tank is sucked into the circulating system by the circulating water pump. After it passes through the equipment to be cooled, it will flow out the water with higher temperature after playing the cooling role, and then it will be cooled by the water circulating radiator and cooling fan, and then add a new circulation
Application:The design of the system is simple, economical and practical, which not only greatly improves the work efficiency, but also greatly helps the pollution of clean environment

Melting Rate: copper:300kg/h brass:400kg/h
Power: 75kw
Principle:The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application:Power frequency cored induction copper melting furnace is specially used for smelting bronze, brass, red copper, etc.

Processing Range:9-12mm
Gearbox:500
Power:15kw
Principle:The pay-off is achieved by driving the pay-off frame with a frequency converter. Different metal materials, different silk varieties and requirements, the drawing process is very different, and the commonly used control technologies for winding are synchronous control and tension control.
Application:Reduces tension and peeling on coiled wire

Processing Range:Φ70
Speed:25m/min
Power:18.5kw
Principle:
Application:This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.

Rated load (kg):1000
Electric power (kw):11kw
Principle:With solid structure, large bearing capacity, stable lifting, simple installation and maintenance, it is an economic and practical ideal cargo conveying equipment for replacing elevators between low floors
Application:It is mainly applicable to the overhaul, maintenance, replacement of objects, maintenance, cleaning, scenery, etc. of cargo and manned aerial operations
Get In Touch From Message
In order to know more about our products, we recommend new products. If you need to leave your contact information, we will send you an electronic atlas.

