PRODUCTS


Melting Rate: copper:500kg/h brass:600kg/h
Power: 120kw
Principle:The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application:Store brass solution, cast brass rod/tube

Cutting diameter:Φ8-45mm
Maximum cutting length:120mm
Working frequency:10-100pice/min
Principle:
Application:Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials

Cutting diameter:Φ8-45mm
Maximum cutting length:120mm
Working frequency:10-100pice/min
Principle:
Application:Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials

Applicable rod diameter (mm):2000-4000
power:14kw
weight:1150kg
Principle:The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application:

Processing range:S160mm-425mm
Speed:40 m/min
Power:75*2kw
Principle:The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application:This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.
WSL-60 Horizontal 2-roll straightening machine
Processing range:Φ15-60mm
Speed:30 m/min
Power:9KW/11KW
Principle:The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application:This machine is used for fine straightening of metal pipe rods such as brass pipe rods, bronze pipe rods, aluminum pipe rods, copper pipe rods, etc., and has a certain polishing effect.
—— STRAIGHTENING MACHINE ——
Used to straighten brass round bars, red copper round bars, bronze round bars, and iron round bars
—— STANDARD SIZES ——
Detailed parameters of the equipment
Model | unit | WSL-20 | WSL-40 | WSL-60 | WSL-100 |
Diameter | mm | Φ5-20 | Φ10-40 | Φ15-60 | Φ30-100 |
Straighten length | m | 1.5-5 | |||
Ruducer | / | JZQ200 | JZQ250 | JZQ350 | JZQ400 |
Motor power | kw | 4.5/5.5 | 6.5/8 | 9/11 |
18.5/22 |
Straighten speed | m/min | 20-25 | 15-23 | 10-18 | 6-10 |
Host size(L*W*H) | mm |
2150*1100*1000 |
2450*1400*1150 | 2175*1500*1200 | 2900*2340*1500 |
Host weight | kg | 1000 | 1300 | 2100 | 3500 |
Unloading rack size(L*W*H) | mm | 2000*1100*840 | 2000*1100*840 | 2000*1100*890 | 2800*1600*1600 |
—— EFFECT COMPARISON ——
Product comparison before and after straightening
—— OPERATING PROCEDURES ——
Slow gear test machine, Fast gear production
Install the knife,Put in the bar,Adjust the pressure roller,Adjust the unloading rack
—— EQUIPMENT DETAILS ——
Detailed display of the product
—— FREE ACCESSORIES ——
Free accessories for two-wheel straightening machine
① Alloy knife *3 ② Feeding tube *3 ③ Unloading rack *1 ④ Tank *1
—— EQUIPMENT SHIPMENT ——
Ships three or four times a week on average
—— INSTALLATION & COMMISSIONING ——
Provide professional technicians for overseas debugging
—— SUCCESS CASE ——
Complete production line
—— FUTUER TEAM ——
About GuangDong Futuer Machinery Co., Ltd.


Melting Rate: copper:500kg/h brass:600kg/h
Power: 120kw
Principle:The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application:Store brass solution, cast brass rod/tube

Cutting diameter:Φ8-45mm
Maximum cutting length:120mm
Working frequency:10-100pice/min
Principle:
Application:Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials

Cutting diameter:Φ8-45mm
Maximum cutting length:120mm
Working frequency:10-100pice/min
Principle:
Application:Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials

Applicable rod diameter (mm):2000-4000
power:14kw
weight:1150kg
Principle:The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application:

Processing range:S160mm-425mm
Speed:40 m/min
Power:75*2kw
Principle:The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application:This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.
Get In Touch From Message
In order to know more about our products, we recommend new products. If you need to leave your contact information, we will send you an electronic atlas.

