PRODUCTS
Product categories
Recommended Products
Model：PLC-5T
Processing Range：Φ85
Speed：25m/min
Power：22kw
Principle：
Application：This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
Processing Range：Φ85
Speed：25m/min
Power：22kw
Principle：
Application：This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
Number of views:
1000
Keywords:
drawing machine
drawing machine
rod peeling machine
bar peeling machine
brass rod peeling machine
Spindle speed：60-5000rpm
Spindle motor power：2.2kw
Spindle clamping method：Spring collet
Tool specifications：12*12/Φ25
Principle：The accuracy of tool path can be analyzed using the idle running energy of CNC machine tools. After inputting the digital program into the machine tool, install the fixture tool and workpiece
Application：Suitable for grinding and polishing flat surfaces, grooves, toothed parts, and various curved surfaces on lathes
Spindle motor power：2.2kw
Spindle clamping method：Spring collet
Tool specifications：12*12/Φ25
Principle：The accuracy of tool path can be analyzed using the idle running energy of CNC machine tools. After inputting the digital program into the machine tool, install the fixture tool and workpiece
Application：Suitable for grinding and polishing flat surfaces, grooves, toothed parts, and various curved surfaces on lathes
Number of views:
1000
Keywords:
Model：TQ-8
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Number of views:
1000
Keywords:
wheel straightening
wire straightening
wire straightening machine
bar straightening machine
浏览量:
1000
GYT-1500 Melting furnace+GYT-750 holding furnace
Classification
Power Frequency Core Furnace
Melting Rate: copper: 600kg/h brass: 700kg/h
Power: 360kw+180kw
Principle: The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application: Power frequency cored induction copper melting furnace is specially used for melting bronze, brass, red copper, etc.
零售价
0.0
Yuan
市场价
0.0
Yuan
浏览量:
1000
产品编号
数量
-
+
库存:
0
1
Product Details
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
—— POWER FREQUENCY CORE FURNACE ——
Power frequency cored induction copper melting furnace is specially used for smelting bronze, brass, red copper, etc.
—— STANDARD SIZES ——
Detailed parameters of the equipment
| Model | unit | GYT-300 | GYT-500 | GYT-750 | GYT-1000 | GYT-1500 | ||||
| Rated Power | kw | 75 | 120 | 180 | 240 | 360 | ||||
| Rated voltage | v | 380 | ||||||||
| Phases | / | 3 | ||||||||
| Frequency | hz | 50 | ||||||||
| Power Factor | / | 0.95 | ||||||||
| maximum melting temperature | ℃ | brass:1080/copper:1350 | ||||||||
| Melting Rate | kg/h | copper:300 brass:400 | copper:500 brass:600 | copper:600 brass:700 | copper:900 brass:1000 | copper:1500 brass:1800 | ||||
| Power Consumption | kwh/t | 250-300 | ||||||||
| Number Of Channels | piece | 1 | 1 | 2 | 2 | 2 | ||||
| Cooling Method | / | air cooled/water cooling | ||||||||
—— EFFECT COMPARISON ——
Product comparison before and after
—— EQUIPMENT DETAILS ——
Detailed display of the product
—— FREE ACCESSORIES ——
Free accessories
—— EQUIPMENT SHIPMENT ——
Ships three or four times a week on average
—— INSTALLATION & COMMISSIONING ——
Provide professional technicians for overseas debugging
—— SUCCESS CASE ——
Complete production line
—— FUTUER TEAM ——
About GuangDong Futuer Machinery Co., Ltd.
Recommended Products
Model：PLC-5T
Processing Range：Φ85
Speed：25m/min
Power：22kw
Principle：
Application：This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
Processing Range：Φ85
Speed：25m/min
Power：22kw
Principle：
Application：This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
Number of views:
1000
Keywords:
drawing machine
drawing machine
rod peeling machine
bar peeling machine
brass rod peeling machine
Spindle speed：60-5000rpm
Spindle motor power：2.2kw
Spindle clamping method：Spring collet
Tool specifications：12*12/Φ25
Principle：The accuracy of tool path can be analyzed using the idle running energy of CNC machine tools. After inputting the digital program into the machine tool, install the fixture tool and workpiece
Application：Suitable for grinding and polishing flat surfaces, grooves, toothed parts, and various curved surfaces on lathes
Spindle motor power：2.2kw
Spindle clamping method：Spring collet
Tool specifications：12*12/Φ25
Principle：The accuracy of tool path can be analyzed using the idle running energy of CNC machine tools. After inputting the digital program into the machine tool, install the fixture tool and workpiece
Application：Suitable for grinding and polishing flat surfaces, grooves, toothed parts, and various curved surfaces on lathes
Number of views:
1000
Keywords:
Model：TQ-8
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Number of views:
1000
Keywords:
wheel straightening
wire straightening
wire straightening machine
bar straightening machine
Get In Touch From Message
In order to know more about our products, we recommend new products. If you need to leave your contact information, we will send you an electronic atlas.
客户留言
Description:
