PRODUCTS
Product categories
Recommended Products
Model：PLC-5T
Processing Range：Φ85
Speed：25m/min
Power：22kw
Principle：
Application：This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
Processing Range：Φ85
Speed：25m/min
Power：22kw
Principle：
Application：This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
Number of views:
1000
Keywords:
drawing machine
drawing machine
rod peeling machine
bar peeling machine
brass rod peeling machine
Spindle speed：60-5000rpm
Spindle motor power：2.2kw
Spindle clamping method：Spring collet
Tool specifications：12*12/Φ25
Principle：The accuracy of tool path can be analyzed using the idle running energy of CNC machine tools. After inputting the digital program into the machine tool, install the fixture tool and workpiece
Application：Suitable for grinding and polishing flat surfaces, grooves, toothed parts, and various curved surfaces on lathes
Spindle motor power：2.2kw
Spindle clamping method：Spring collet
Tool specifications：12*12/Φ25
Principle：The accuracy of tool path can be analyzed using the idle running energy of CNC machine tools. After inputting the digital program into the machine tool, install the fixture tool and workpiece
Application：Suitable for grinding and polishing flat surfaces, grooves, toothed parts, and various curved surfaces on lathes
Number of views:
1000
Keywords:
Model：TQ-8
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Number of views:
1000
Keywords:
wheel straightening
wire straightening
wire straightening machine
bar straightening machine
浏览量:
1000
PLC-5T Single Bar Peeling Machine
Classification
Chain Peeling Machine
Processing Range：Φ85
Speed：25m/min
Power：22kw
Principle：
Application：This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
零售价
0.0
Yuan
市场价
0.0
Yuan
浏览量:
1000
产品编号
数量
-
+
库存:
0
1
Product Details
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
—— PEELING MACHINE ——
Suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods
—— STANDARD SIZES ——
Detailed parameters of the equipment
| Model(T) | DLG-3T | DLG-5T | DLG-8T | DLG-10T | DLG-15T | |||
| Pull（kn） | 30 | 50 | 80 | 100 | 150 | |||
| Maximum Clamping Size（mm) | Φ70 | Φ85 | Φ130 | Φ160 | Φ230 | |||
| Pulling Speed（m/min） | 25 | 25 | 20 | 20 | 15 | |||
| Power（kw） | 18.5 | 22 | 30 | 37 | 45 | |||
—— EFFECT COMPARISON ——
Product Comparison Before And After Peeling
—— OPERATING PROCEDURES ——
Press The Switch，Send Copper Rod，Step On Pedal，Pull Copper Rod
Turn the knob to [Automatic], move the trolley to the end, put in the pull rod, step on the foot switch, the trolley automatically enters and raises its head, push the pull rod to the die opening, when the trolley is in place, clamp the clamp strip, and the stripping starts; Release the foot switch, the material rack will automatically reset and complete the automatic operation.
—— EQUIPMENT DETAILS ——
Detailed Display Of The Product
—— FREE ACCESSORIES ——
Free Accessories For Double Rod Lasher
—— EQUIPMENT SHIPMENT ——
Ships three or four times a week on average
—— INSTALLATION & COMMISSIONING ——
Provide professional technicians for overseas debugging
—— SUCCESS CASE ——
Complete production line
—— FUTUER TEAM ——
About Guangdong Futuer Machinery Co., Ltd.
Keyword:
drawing machine
drawing machine
rod peeling machine
bar peeling machine
brass rod peeling machine
上一个
无
Recommended Products
Model：PLC-5T
Processing Range：Φ85
Speed：25m/min
Power：22kw
Principle：
Application：This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
Processing Range：Φ85
Speed：25m/min
Power：22kw
Principle：
Application：This machine is suitable for peeling, polishing and peeling processing of metal rods such as steel rods, copper rods and aluminum rods, Special-shaped rods such as round rods, hexagonal rods, square rods, etc.
Number of views:
1000
Keywords:
drawing machine
drawing machine
rod peeling machine
bar peeling machine
brass rod peeling machine
Spindle speed：60-5000rpm
Spindle motor power：2.2kw
Spindle clamping method：Spring collet
Tool specifications：12*12/Φ25
Principle：The accuracy of tool path can be analyzed using the idle running energy of CNC machine tools. After inputting the digital program into the machine tool, install the fixture tool and workpiece
Application：Suitable for grinding and polishing flat surfaces, grooves, toothed parts, and various curved surfaces on lathes
Spindle motor power：2.2kw
Spindle clamping method：Spring collet
Tool specifications：12*12/Φ25
Principle：The accuracy of tool path can be analyzed using the idle running energy of CNC machine tools. After inputting the digital program into the machine tool, install the fixture tool and workpiece
Application：Suitable for grinding and polishing flat surfaces, grooves, toothed parts, and various curved surfaces on lathes
Number of views:
1000
Keywords:
Model：TQ-8
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Number of views:
1000
Keywords:
wheel straightening
wire straightening
wire straightening machine
bar straightening machine
Get In Touch From Message
In order to know more about our products, we recommend new products. If you need to leave your contact information, we will send you an electronic atlas.
客户留言
Description:
